The TS-2500 systems below were designed for use with Phenolic Panels with thicknesses of either 5/16" or 3/8". All extrusions are made from heavy duty aluminum and when combined with panels, you have a very durable interior solution. |
This line of products contains extrusions that close off the panel edge & joints. This application works well in Hospitals or high traffic areas where a closed edge is preferred.
The Open Reveal System contains a 1/4" wide channel at all edge & joint locations. This system is great for Designers looking for a flush system with extrusions that catch the eye.
This system has a very sleek design and contains narrow edges & joints. This system leaves a slight shadow between the panel & extrusion creating a unique, upscale look.
Our Z-Clips were designed for both the weight and air flow requirements on the phenolic panels. This is for designers who are just looking to mount the panels to the wall.
Wall Panel System offers a variety of other products like shims, fasteners, VHB tape, Silicone & Router / Drill bits to make the installation easier. Everything you need to install, from one source.
|
Captured SystemN114 W19225 Clinton Drive | Germantown, Wisconsin | Phone: 262-255-6116 | Fax: 262-255-3933
© 2010 Permar Ltd - All Rights Reserved
Designed by Schairer Custom Web Designs
Designed by Schairer Custom Web Designs